Seal Self Adhesive DS24 is a self-adhesive bituminous waterproofing membrane that forms a total barrier against water, vapour & gases. It consists of a self-adhesive bituminous compound and is self-protected by reinforced aluminum film. The polyester reinforced aluminums make the membrane resistant to work site traffic.

This membrane designed to act as a barrier to water, vapour & gases features an outer aluminum film and can therefore be exposed directly to the sun. Self Adhesive DS24 is suitable for all roof applications. These membranes are waterproof, self adhesive & excellent puncture resistance. It is cold applied without use of flames & is protected by reinforced aluminum film.

ADVANTAGES :

• Quick Installation.
• Installation does not require skilled personnel.
• Elimination of risks deriving from the use of open fames.
• Unaffected by environmental pollution and ozone.
• Compatible with other waterproofing systems.

USES :

• Waterproofing in general.
• Water proofing on Metal Sheets, Acrylic Sheets, Wooden surface, Concrete etc.
• Elimination of risks deriving from the use of open fames.
• Unaffected by environmental pollution and ozone.
• Compatible with other waterproofing systems.

Technical SPECIFICATION OF Self Adhesive DS24 :

CHARACTERISTICS	VALUE	TEST
Thickness	1.2mm	EN 1849-1
Tensile Strength	Long.>200N/50mm Trans.>200 N/50mm	EN 12311-1
Elongation at Break	Lon>20% Trans.>20%	EN 12311-1
Static Load Resistance	Met.A-15 Kg Met.B 20 Kg	EN 12730
Tear Resistance	Long. 70 N Trans. 70 N	EN 12310-1
Peel Resistance of Joints	35 N/50 mm	EN 12316-1
Impermeability	≥ 60 Kpa	EN 1928
Vapour Transmission Rate	Sd ≥ 1500 m	EN 1931
Radon TransmissionRate	0.47 x 10 m/s	SP Swedish Nat,Testing & Research Institute.
Permeability to Radon Gas	0.56 x 10 m²/s	SP Swedish Nat.Testing & research institute.
Permeability to Methane Gas	< 5 cc/m² x 24h x atm	CSI Method
Application Temperature	+ 5° C /45° C
Service Temperature	-40°C / +80°C